VTL TL-6.5 Series II

Valve and FET Hybrid Preamplifier
  • Valve gain stage with FET buffer
  • Balanced differential circuit in mirror image
  • Discrete resistor volume in 95 steps
  • Zero global negative feedback
  • Eight inputs with three balanced
  • Processor loop for home cinema
  • Machined aluminium full-function remote
  • Assembled by hand in California

Awards

  • The Absolute Sound Editors' Choice 2022
  • Stereophile Recommended Components 2020, Class A
  • Hi-Fi+ Editor's Choice 2020Reviewed with the S-200

£28,200.00

Add to Cart
The VTL TL-6.5 Series II from the front, silver aluminium with a black display panel and a large volume knob
VTL TL-6.5 Series II
£28,200.00

Collection only, from our showroom at 138-140 Wigmore Street, London W1U 3SG.

Two Technologies in a Single Chassis

Valves and FETs share the work inside the VTL TL-6.5 Series II. In this hybrid preamplifier of VTL’s Signature line, valves take charge of the voltage gain and a FET output buffer supplies the current, all within one chassis that VTL builds by hand in Chino, California. VTL introduced the Series II more than seven years after the first TL-6.5 Signature, carrying into a single enclosure most of the advanced technology of VTL’s flagship TL-7.5 Series III.

By VTL’s own account, the change brings a more valve-like character, with more sharply defined images in the room, a higher level of inner detail and a much improved mid-bass and midrange. A cello gains body without blurring the line of the bow, and the lower register of a grand piano carries weight and clarity together.

Hi-Fi+ Editor's Choice 2020

The one-box line-stage was always quick and agile, but now it has added serious low-frequency extension and grip to the mix, moving it far closer to the flagship 7.5 in overall performance.

Roy Gregory, Hi-Fi+, January 2020, with the S-200 Read the review

Valves for Voltage, FETs for Current

The hybrid circuit plays each technology to a particular strength. A pair of 12AU7 valves, the ECC82 in European terms, forms the differential gain stage, where valves excel in linearity, while the FET buffer delivers the current that long interconnects and demanding amplifiers call for.

For the Series II, VTL rebuilt the high-current stage around a newly available family of FETs first created for solar panels and electric cars. These normally-on devices conduct continuously, behaving more like valves than conventional MOSFETs, which must be biased into conduction, and VTL credits the new devices with a simpler bias circuit and a sound closer to valves.

The gain stage is shock-mounted, as in the TL-7.5, and damped against microphony, and the whole circuit runs without global negative feedback, which VTL associates with quicker dynamics and finer tonal resolution.

A Mirror-Image Differential Circuit

Signals keep a balanced, differential form throughout, on boards laid out as a mirror image. The topology stays deliberately lean, two stages in all, a differential gain stage followed by output buffers, in keeping with VTL’s conviction that fewer parts in the signal path make for a purer, more immediate sound.

The output stage presents a very low impedance, so the preamplifier can drive any length of cable and any power amplifier, two amplifiers in parallel or a subwoofer with equal composure, while generous output capacitors keep a firm hand on the bass.

Stereophile Recommended Components 2020, Class A

The TL6.5 II also proved to be a fast preamp, especially at delivering the front edge of transients.

Fred Kaplan, Stereophile, August 2016 Read the review

Level Set by Discrete Resistors

Volume runs through a single fully balanced relay attenuator built from discrete resistors, moving in 95 steps, and the same network carries out every attenuation function. Relays switch the resistors into the signal path, so no conventional potentiometer stands between source and amplifier.

A gain switch offers a lower setting for systems that need less gain, and programmable input offsets bring every source to a matched level before the music reaches the power amplifier.

Power Supplies Built for Silence

Behind the audio circuit sits a precision-regulated power supply built around current-sourced shunt regulators, a design VTL chose because the regulation itself leaves less of a mark on the signal. Large reserves of stored energy shield the music from fluctuations in the mains, Teflon bypass capacitors refine the supply, and audiophile-grade capacitors with bypassing fill the signal path.

Valve life receives equal care. At switch-on, the high-tension supply and the filaments ramp up gently, so each valve starts without shock, and the processor that governs every function was designed so that the processor’s own noise stays out of the music.

The Absolute Sound Editors' Choice 2022

…placing the TL6.5 Series II Signature in my system has brought me to a place of musical pleasure in my home beyond any I’ve known in many a year.

Wayne Garcia, The Absolute Sound, May/June 2020 Read the review

Eight Inputs and a Machined Remote

Eight inputs serve a full collection of sources, three accepting balanced XLR connections or RCA alike, and the outputs place balanced and single-ended connections side by side, joined by buffered tape outputs with monitoring on both loops.

Any input can work as a processor loop at fixed unity gain, ready for a home cinema processor, while RS-232 control in both directions and a pair of programmable triggers link the preamplifier to control systems and partnering components.

Daily use is just as considered. A machined aluminium remote wand handles volume, balance, fade and mute, along with source selection, phase and power, and the electronics sit in a rigid chassis of steel and non-magnetic material.

The Audio Beat

The VTL TL-6.5 Series II doesn’t just take; it commands a place on the extremely short list of musically authoritative and satisfying one-box line stages.

Roy Gregory, The Audio Beat, April 2018 Read the review

Partners for Amplification and Vinyl

VTL considers this hybrid an exceptional match for any of VTL’s other Signature components, including the S-200 Signature, and records find a natural partner in VTL’s TP-6.5 Series II, whose forerunner, the original TP-6.5 phono stage, VTL created to match the TL-6.5 in sound, controls and appearance.

The low-impedance output drives VTL’s Performance amplifiers, such as the ST-150, as comfortably as amplifiers from other manufacturers, and the power amplifiers in Audio Lounge’s range widen the choice of partners.

A private listening session in London can be requested on enquiry, and the full range of preamplifiers at Audio Lounge puts this Signature model in context. Once reserved, the preamplifier is collected from the showroom.

About VTL

Spelled out in full as Vacuum Tube Logic, VTL has long argued for valves on engineering grounds. Valves allow simple circuits with few parts, overload gracefully when the music peaks, and are linear enough to need far less negative feedback than transistors, which VTL hears as a more immediate, livelier sound. Where modern components serve better, VTL adopts those components, from solid-state rectifier diodes to high-capacity capacitors and Teflon-insulated wiring, letting valves perform nearer the limits of valve design than ever before. Every VTL product is hand-built by experienced craftspeople in VTL’s own facility in Chino, California, and made to give lasting service for generations. The VTL models at Audio Lounge show that thinking at every level of VTL’s range.

Questions About the VTL TL-6.5 Series II

What kind of preamplifier is the VTL TL-6.5 Series II?

Designed for VTL’s Signature line, the VTL TL-6.5 Series II joins valve voltage gain to a FET output buffer in a fully balanced, differential hybrid preamplifier, hand-built in Chino, California. Most of the technology of VTL’s flagship TL-7.5 Series III fits inside one chassis here, and eight inputs, outputs in both balanced and single-ended form and a full-function remote complete the design.

Why does the VTL TL-6.5 Series II combine valves with FETs?

In the VTL TL-6.5 Series II, valves serve the gain stage for voltage linearity and FETs the output for current capacity. The Series II adopts normally-on FETs, a type made for solar panels and electric vehicles, which conduct continuously as valves do instead of needing a bias to switch on, as MOSFETs do. VTL says the change simplifies the bias circuit and makes the sound more valve-like, and the design uses no global negative feedback.

How many valves are inside the VTL TL-6.5 Series II?

Two 12AU7 valves, also sold as ECC82, form the differential gain stage. That stage is shock-mounted and damped against microphony, and at switch-on a ramped soft start brings up the B+ supply and the heaters gently to extend valve life. VTL’s buying guide describes VTL preamplifiers as needing little or no maintenance, which suits owners who are new to valves.

What changed from the original TL-6.5 in the Series II?

VTL revised the TL-6.5 extensively for the Series II: a new output stage with normally-on FETs, a current-sourced shunt-regulated power supply, an improved current source for better single-ended operation, zero global negative feedback, re-voiced audiophile capacitors with additional bypassing, Teflon power supply bypass capacitors and a damped valve stage. VTL’s data sheet lists the Series II as a factory upgrade for the original model, and Audio Lounge can enquire about the upgrade for an owner.

Is the VTL TL-6.5 Series II a stereo preamp with remote control?

Yes. A machined aluminium wand controls volume, mute, balance and fade, chooses the source, reverses phase and switches the VTL TL-6.5 Series II on and off. Behind those commands sit a 95-step relay attenuator of discrete resistors spanning 70 dB, a gain switch that drops the level by 6 dB, and offsets that can be programmed for each input.

What connections does the VTL TL-6.5 Series II have?

Eight inputs in all serve the VTL TL-6.5 Series II: three accept either XLR or RCA cables, and five are RCA only. The outputs comprise a balanced XLR pair, two RCA pairs and two buffered RCA tape outputs, with a tape monitor for each loop. Two programmable trigger outputs and an RS-232 port for two-way control complete the rear panel.

Can the VTL TL-6.5 Series II share a system with a home cinema processor?

Yes. Any of the eight inputs can become a fixed, unity-gain pass-through, leaving the processor in charge of the front-channel volume. VTL fitted bi-directional RS-232 control for compatibility with modern home cinema systems, and two programmable triggers switch on partnering components, so the VTL TL-6.5 Series II joins a wider installation with ease.

Where does the VTL TL-6.5 Series II sit among VTL’s preamplifiers?

Within VTL’s Signature line, the VTL TL-6.5 Series II stands above the all-valve TL-5.5 Series II; below both sits the TL-2.5i of VTL’s Performance line. VTL’s flagship TL-7.5 Series III divides control and audio circuits between two chassis, and this single-chassis hybrid carries most of that technology. On request, Audio Lounge sets up comparisons by appointment.

What does VTL’s data sheet list for the VTL TL-6.5 Series II?

According to VTL, frequency response falls by no more than 1 dB between 1 Hz and 200 kHz, and channel separation is better than 100 dB at 1 kHz, with more than 80 dB at 20 kHz. Normal gain is 19.2 dB balanced and 13.2 dB single-ended. Output impedance is 25 ohms, rising to 150 ohms at 10 Hz; input impedance 50 kΩ (20 kΩ minimum); maximum output 30 V, or 10 V into 600 ohms; consumption 150 W.

What are the size, weight and collection terms of the VTL TL-6.5 Series II?

A footprint of 445 by 445 mm, a height of 153 mm and a weight of 21.8 kg, or 24.95 kg as shipped, define the preamplifier. Audio Lounge supplies the preamplifier for collection only, so a reserved unit is held in the London showroom on Wigmore Street, and a listening appointment can be requested when reserving.

Specifications

Amplification Design

Hybrid (valve and FET)

Valve complement

2 x 12AU7 (ECC82)

Inputs

3 x XLR or RCA line (balanced or single-ended), 5 x RCA line

Outputs

2 x RCA preamp output, 2 x RCA tape output (buffered), Balanced XLR Preamp output

Gain

Normal: 19.2 dB with balanced output, 13.2 dB with single-ended output, Low: 6 dB below normal

Input impedance

50 kΩ

Output impedance

25 Ω (150 Ω maximum at 10 Hz)

Maximum output

30 V into 10 kΩ or above (10 Hz to 200 kHz, < 1% THD), 10 V into 600 Ω

Frequency response

1 Hz to 200 kHz (+0/-1 dB)

Channel separation

> 100 dB at 1 kHz (> 80 dB at 20 kHz)

Display and controls

95-step fully balanced relay attenuator of discrete resistors (70 dB range), Remote: power, source, volume, mute, fade, balance, phase reverse, Gain switch: normal or low, Tape monitor for both tape loops

Connectivity

2 x programmable trigger output, RS-232 (bi-directional)

System functions

Any of 8 inputs programmable as unity-gain pass-through (processor loop), Programmable input offsets

Start up protection

Ramped B+ and filament soft start

Construction

Fully balanced differential circuit with mirror-image layout, Two-stage circuit: valve gain stage, FET output buffer, Normally-on FET output stage, Zero global negative feedback, Shock-mounted, microphonically damped valve gain stage, 20 µF output capacitors, Current-sourced shunt-regulated power supply, Teflon power supply bypass capacitors, Rigid steel and non-magnetic chassis

Power consumption

150 W

Accessories (included)

Remote control

Production

Hand-built in Chino, California, USA

Condition

New

Colour

Silver

Dimensions (H x W x D)

153 x 445 x 445 mm

Weight

21.8 kg