An All-Valve Signature Preamplifier
The VTL TL-5.5 Series II is a fully balanced preamplifier from VTL’s Signature line, built around an all-valve circuit and assembled by hand in VTL’s Chino workshops in California. The first TL-5.5 arrived in 1997 and earned a lasting reputation for outstanding performance; the Series II keeps the qualities that won that following and brings across much of the engineering VTL developed for the TL-7.5 Reference and the TL-6.5 Signature, the two preamplifiers above the TL-5.5 Series II in VTL’s range.
The outcome, in VTL’s own words, is a full yet neutral sound with high resolution, transparency, speed and powerful dynamics. A solo voice holds both warmth and outline, a string quartet keeps the grain of each bow, and a full orchestra opens out without strain or haze.
Balanced from the First Socket to the Last
Balanced operation runs through the whole signal path of the VTL TL-5.5 Series II, inputs and outputs alike, in a differential circuit drawn from VTL’s larger designs. A lower-gain, high-current 12AU7 circuit works with a 12AT7 buffer and minimal negative feedback, and an output stage of high current and low impedance passes the signal on with real authority.
Two of the eight inputs accept XLR cables as readily as RCA, and the main output appears in both forms as well, so the TL-5.5 Series II slips naturally into place as a balanced stereo preamp at the centre of a high-end system. A gain switch adds a lower setting for the occasions a system asks for one, and soft-touch buttons select the inputs through relays.

VTL Amplifiers has produced a winner.
Quiet Power Behind the Music
Silence here is engineered rather than hoped for. Precision regulation governs both the positive and the negative high-tension supplies, as in VTL’s larger preamplifiers, while a power transformer of balanced, low-radiation design sits within a rigid, well-shielded chassis. Even the logic keeps out of the music’s way: the microprocessor sleeps when idle, and the display is driven by a method chosen for quietness.
Valve life receives the same care. At switch-on, VTL’s life extender circuit holds back the high-tension supply and brings the heaters up gently, so each valve wakes without shock, and the design follows VTL’s aim of components that run without fuss for years once installed.
Vinyl Waiting Inside the Chassis
Records need not mean another box on the rack. The VTL TL-5.5 Series II can be ordered with VTL’s internal phono stage already fitted, or chosen in line-only form and given the phono board later, because VTL designed the board to be retrofitted inside the chassis.
The circuit carries VTL’s latest thinking from the TP-6.5 Signature: a high-current stage of JFETs and valves for moving coil cartridges, a split-pole passive RIAA network and a twin-valve moving magnet stage with generous headroom. Gain and loading are set inside to suit the cartridge, a rumble filter answers from the front panel, and triple-precision regulation of the supplies yields what VTL describes as a clean and quiet yet dynamic sound that brings vinyl to life. For the source, the turntables at Audio Lounge make natural companions.

Like a lip-smacking bottle of wine that leaves you anticipating the next glass, this VTL tandem will have you excitedly pulling out record after record.
Command from the Armchair
Daily use borrows the interface of VTL’s Reference and Signature preamplifiers, and a full-function remote in aluminium keeps the controls that matter close at hand, from source and level to balance and phase. A chip-based differential attenuator moves in fine increments under a three-digit display, with balance and channel offset set in software for precision.
For larger installations, any input can be programmed as a pass-through, two trigger outputs can wake partnering equipment, and a bi-directional RS-232 port links the preamplifier with control systems. A mono switch and the tape monitor sit on the front panel.
A Faceplate Milled for the Signature Line
The Series II introduced a new face. A precision-milled aluminium faceplate, cut in the style of VTL’s Reference and Signature models, frames the display window and the large volume control, and the chassis shares the dimensions of the TP-6.5 Signature. Silver aluminium meets a darkened display window and base, a quietly confident presence on any rack.
Every unit is built by hand in California by VTL’s experienced production craftspeople, as every VTL component is, from the smallest preamplifier to the largest mono amplifier.
Partnering Amplifiers and Hearing the TL-5.5 Series II
Balanced and single-ended outputs sit side by side, so the VTL TL-5.5 Series II connects to VTL’s own stereo and mono designs, such as the ST-150, and to amplifiers from other high-end brands alike, while a buffered record output serves a recorder. Audio Lounge’s selection of power amplifiers suggests suitable partners, while the full preamplifier collection offers the wider choice.
Listening sessions are booked by appointment through Audio Lounge, and once reserved the TL-5.5 Series II waits in the London showroom for the owner to take home.

What made this pair so easy to review is their perfect synergy.
About VTL
Every VTL component leaves Chino, California, carrying proof of the care taken over the build. VTL, the initials of Vacuum Tube Logic, runs each product through a lengthy burn-in followed by testing, packs the Audio Precision measurement results with every unit, and completes a listening test before a quality control engineer signs the piece off for a last cosmetic inspection and packing. The routine reflects the philosophy VTL has followed since the early years, to keep designs simple and compact: simple circuits, attention to detail, high quality parts and the best valves, assembled by hand by experienced craftspeople. Production has stayed in Chino since 1987, and the VTL brand page at Audio Lounge sets out all three VTL series for comparison.
Questions About the VTL TL-5.5 Series II
What is the VTL TL-5.5 Series II?
The VTL TL-5.5 Series II is a balanced preamplifier with an all-valve circuit, part of VTL’s Signature line and hand-built in Chino, California, with an internal phono stage available as an option. Eight inputs, including two balanced, feed outputs on both XLR and RCA, with a full-function remote for the essentials. The Series II succeeds the original TL-5.5 of 1997, with technology taken from VTL’s TL-7.5 Reference and TL-6.5 Signature preamplifiers.
Is the VTL TL-5.5 Series II a true balanced preamp?
Yes. The VTL TL-5.5 Series II keeps the signal balanced from input to output in a differential circuit. Two inputs take XLR or RCA connections, so the TL-5.5 Series II acts as a preamp with balanced inputs wherever a system calls for XLR cabling, and the main output is available on XLR beside RCA. Normal gain is 17 dB balanced and 11 dB single-ended; the low gain setting gives 11 dB and 6 dB.
Which valves does the VTL TL-5.5 Series II use?
The line stage runs on two 12AU7 and four 12AT7 valves, the 12AU7 circuit working at low gain and high current behind a 12AT7 buffer, with little negative feedback. Fitting the optional phono stage brings two 12AX7 and two 12AT7 valves for moving magnet cartridges, with two 12AU7 valves joining a JFET input stage for moving coil. A life extender circuit delays the B+ supply and ramps the filaments softly each time the preamplifier is switched on.
Can a phono stage be added to the VTL TL-5.5 Series II later?
Yes. VTL built the phono stage of the VTL TL-5.5 Series II as an internal board that can be retrofitted, so the preamplifier can leave the showroom with the board installed or in line-only form, ready for the board to be added later. Moving magnet or moving coil operation is chosen by jumper, with 40 dB of gain for moving magnet and 54, 60 or 66 dB for moving coil. Audio Lounge welcomes enquiries about adding the board.
What loading does the TL-5.5 Series II phono stage provide?
Moving magnet cartridges see a 47 kΩ load, while moving coil loading is selectable at 100, 220 or 470 ohms, 1 kΩ or 47 kΩ, chosen by jumper inside the chassis. An enhanced RIAA curve can be selected the same way, MC and MM gain trims fine-tune the levels, a rumble filter is switched from the front panel, and the phono output can be set balanced or single-ended.
Which inputs and outputs does the VTL TL-5.5 Series II provide?
The VTL TL-5.5 Series II offers eight inputs: two that accept balanced XLR or single-ended RCA, five single-ended RCA line inputs and a tape input. With the phono stage fitted, the phono input takes the place of the second auxiliary input. Outputs comprise one balanced XLR pair, one single-ended RCA pair and a buffered RCA record output, joined by an RS-232 port and two programmable trigger outputs.
Is the VTL TL-5.5 Series II a remote control preamplifier?
Yes. The VTL TL-5.5 Series II is a remote control preamplifier with a full-function aluminium handset for power, source selection, volume, mute, fade, balance and phase reverse. Volume moves through a 128-step chip-based differential control shown on a three-digit display. Mono and tape monitor buttons join the front panel controls, and bi-directional RS-232 control allows programmable input offsets, input disabling and a pass-through setting for any input.
How does the VTL TL-5.5 Series II compare with other VTL preamplifiers?
The VTL TL-5.5 Series II is the all-valve, fully balanced model of VTL’s Signature line. The TL-2.5i in VTL’s Performance Series is also an all-valve design but works with single-ended connections, while the TL-6.5 Series II Signature and the TL-7.5 Series III Reference above combine valves with FETs. All four share VTL’s emphasis on simple circuits and premium parts, and a side-by-side audition can be arranged on enquiry.
Which measurements does VTL publish for the VTL TL-5.5 Series II?
Frequency response runs from 1 Hz to 200 kHz, +0 and -1 dB, and channel separation exceeds 100 dB at 1 kHz and 80 dB at 20 kHz. Maximum output is 30 V from 10 Hz to 200 kHz at under 1% THD, or 1.75 V into 600 ohms. Output impedance is 150 ohms, 400 ohms at most at 10 Hz, and input impedance 35 kΩ. Power consumption is 60 W, or 130 W with the phono stage.
How large is the VTL TL-5.5 Series II, and where is the preamplifier collected?
The VTL TL-5.5 Series II measures 445 mm wide, 445 mm deep and 121 mm tall, and weighs 13.6 kg, or 18.1 kg packed. Audio Lounge sells the TL-5.5 Series II for collection only: once reserved, the preamplifier is picked up from Audio Lounge’s London showroom on Wigmore Street, where demonstrations can be arranged by appointment.






