The Signature Line’s Answer to Vinyl
The VTL TP-6.5 Series II is the phono stage of VTL’s Signature line, a hybrid design of JFETs and valves, hand-assembled where every VTL component is made, in Chino, California. VTL describes the Series II as a major update to the TP-6.5 Signature, bringing circuit refinements that VTL first developed for the TL-7.5 Series III, the Reference preamplifier at the top of the range, together with a stronger, newly designed reserve of power for the active moving coil stage.
Few tasks in a music system ask as much. A cartridge produces only a whisper of voltage, and every record carries an equalisation curve that has to be reversed with precision before a single note sounds as recorded. In VTL’s own description, the Series II surrounds voices with more air and adds finesse, extension and nuance, for an overall more lifelike impression of the performance.
A Hybrid Front End for Low-Output Moving Coils
Moving coil cartridges produce the smallest signals in high-end audio, and the active input of the VTL TP-6.5 Series II meets those signals with a quiet JFET driving a high-current 12AU7 valve gain stage. VTL chose the pairing for quiet operation and for the highest resolution of the smallest signal levels, so the decay of a cymbal or the breath before a sung phrase arrives intact.
The Series II gave that stage particular attention. A deep, low-impedance reserve of power, fed through cascaded regulators and capacitance multiplier circuits, keeps ripple and noise away from the moving coil signal, and the latest gel capacitors place far more capacitance in far smaller packages. VTL credits the change with a lower noise level, the ability to handle cartridges of very low output, and greater speed and dynamics from the active stage.
The Audio Beat
At its best, the TP-6.5 II has that rare ability to shrug off its technological baggage, sounding neither overtly tubelike, nor dryly etched and solid-statey.
Shunt Regulation and a Darker Background
Among the design breakthroughs VTL names for the Series II is the use of a shunt regulator within the supply. Regulation and ripple rejection improve, and because the regulator itself contributes less amplification, the supply leaves a smaller imprint on the signal. VTL hears the result as a noticeably lower background noise, greater stability and clearer delineation of the midrange and midbass.
The supplies are dual mono from end to end, with cascaded precision regulation, shielding and film bypassing for high-frequency performance, while low-radiation UI core power transformers keep a separate supply for the control logic. Filtering clears radio frequency interference from the mains path, and switchable RF filtering guards both inputs.
Balanced Outputs from a Passive RIAA Network
Equalisation takes place in an accurate four-corner passive RIAA network with a split pole for greater precision, and the whole circuit runs with zero loop feedback. Gain trims hold the two channels in close balance, and the coupling capacitors are of Signature and Reference grade.
A phase splitter and an output buffer, both built on 12AT7 valves, give the phono preamp balanced outputs on XLR beside a single-ended pair on RCA. The balanced connection carries the highest gain of the design, a natural match for VTL’s balanced preamplifiers and for any high-end system cabled in XLR.
Two Inputs and Two Routes for Moving Coil
Two single-ended inputs, each with discrete load settings, allow two tonearms or two cartridges to stay connected at the same time. As standard, one input feeds the active hybrid stage for moving coil designs and the other a dedicated moving magnet stage.
The VTL TP-6.5 Series II can also be ordered with a high-quality transformer option. The moving magnet input then becomes a second moving coil input served by step up transformers, and the cartridge is loaded through the transformer rather than a loading resistor, preserving as much of the signal as possible. VTL notes that certain cartridges sound substantially better through transformers than through an active stage, so the route can follow the cartridge. Either way, the inputs switch only after amplification, sparing the fragile moving coil signal any loss on the way.
VTL’s Performance phono stage, the TP-2.5i, carries step up transformers as standard; on the Signature model the transformers are an option, chosen together with the second moving coil input.

Either input though, produced the most subtle “kiss of liquidity” and musical flow that distinguishes a tube-based phono preamp from a solid-state one.
Every Setting Within Reach of the Chair
Gain and cartridge loading, the two adjustments that matter most when a new cartridge arrives, can be altered at the front panel or with the remote control, and a quiet seven-segment display shows each setting. Moving coil loading spans a wide choice of values with a user-defined position for an unusual design, and the moving magnet input has separate settings.
Further buttons select the input, mute the output, combine both channels for mono records, invert phase absolutely or between the channels, and choose Enhanced RIAA in place of the standard curve, with a rumble cut on hand. When the controls are not in use, the microprocessor rests in a quiet sleep mode.
Steel, Aluminium and a Signature Face
A rigid, braced chassis of steel and aluminium shields the circuit from electromagnetic interference, radio frequencies and hum, with minimal disturbance from vibration. Every noisy component sits behind steel, the amplifier section carries additional steel shielding, and the gain stages are shock mounted.
Silver aluminium frames a dark display panel and a row of discreet buttons, in the cosmetics VTL drew up for the TP-6.5 so that the phono stage would sit naturally beside the senior TL-6.5 and TL-7.5 preamplifiers. One chassis holds the entire design, power supplies included, and every unit is assembled by hand in California.
Hearing the VTL TP-6.5 Series II at Audio Lounge
Records already known by heart reveal the most about any source component, and listening sessions on Wigmore Street are arranged by appointment through an enquiry. The showroom’s turntables and moving coil cartridges supply partners for the source, while Audio Lounge’s wider range of phono stages sets the VTL TP-6.5 Series II beside alternatives at every level.
Whichever configuration is chosen, the VTL TP-6.5 Series II is kept aside on Wigmore Street once reserved, ready for the owner to collect.
About VTL
Valves and modern engineering have shared the VTL workbench for decades. The name stands for Vacuum Tube Logic, production settled in Chino, California, in 1987, and all VTL manufacturing remains there today. After David and Luke Manley went separate ways in 1993, Luke led VTL back to basics: a range pared to high-end designs for the home, standardised manufacturing, a stronger quality process, and new models made easier to live with through remote operation and updated circuits. From 2002 a new generation joined valve circuits to innovative solid-state and control-system design, the path that produced the TL-7.5 Reference preamplifier, the Siegfried Reference monoblocks and the S-400 Reference stereo amplifier. The complete VTL range at Audio Lounge follows that path through all three VTL series.
Questions About the VTL TP-6.5 Series II
What exactly is the VTL TP-6.5 Series II?
The VTL TP-6.5 Series II is a hybrid phono stage from VTL’s Signature series, assembled by hand in California, in which a JFET input stage hands the signal to valves. One chassis holds an active moving coil input, a moving magnet input that can be exchanged for a second moving coil input with step up transformers, and balanced XLR and single-ended RCA outputs. Gain, loading and the other functions are adjusted at the front panel or by remote.
Is the VTL TP-6.5 Series II a balanced phono stage?
At the output, yes. Two 12AT7 valves work as the phase splitter that creates the balanced signal and two more as the output buffer, feeding a pair of XLR outputs beside the RCA pair. The balanced connection gives the full gain: 68 dB from the active moving coil input against 62 dB single-ended, and 40 dB against 35 dB at the moving magnet input. Both phono inputs are single-ended RCA.
Which cartridges suit the VTL TP-6.5 Series II?
Moving coil and moving magnet designs both suit. VTL recommends a minimum output of 0.2 mV for moving coil cartridges, which the active input serves with balanced gain of 50, 56, 62 or 68 dB and a load chosen from 100, 250 and 470 ohms, 1k, 2.5k, 4.7k and 47k ohms, or a user-defined value. Moving magnet cartridges from 1.5 mV can be loaded at 10k, 22k or 47k ohms, plus a custom setting.
What does the transformer option change on the VTL TP-6.5 Series II?
The option replaces the moving magnet input with a second moving coil input, fed through high-quality step up transformers. That input gives 65 dB from the balanced outputs and 59 dB single-ended, with the transformer loading the cartridge at 100 ohms, 470 ohms or 1k ohms. Two moving coil cartridges, on two tonearms if wished, can then stay connected, each on the route that suits the cartridge best.
Which outputs does the VTL TP-6.5 Series II have?
A balanced pair on XLR and a single-ended pair on RCA, with an output impedance of 150 ohms and up to 10 V at 1 kHz under 1% THD into 10k ohms. On the moving coil inputs the balanced outputs carry 6 dB more gain, so the VTL TP-6.5 Series II works as a phono preamp with XLR output wherever the preamplifier accepts XLR, and connects through RCA elsewhere.
Can gain and loading be changed from the listening seat?
Yes. The remote control of the VTL TP-6.5 Series II covers power, input selection, gain up and down, cartridge load, mono, phase, rumble cut and mute, while the front panel adds the choice between standard and Enhanced RIAA. A quiet seven-segment LED display shows the gain and load settings, and each input has discrete load settings, so the loading of each cartridge is kept separately.
Which valves does the VTL TP-6.5 Series II use?
Eight valves in all. Two 12AU7 valves form the moving coil gain stage behind a quiet JFET input, two 12AX7 valves serve the moving magnet stage, two 12AT7 valves act as the phase splitter for the balanced output, and two more 12AT7 valves make up the output buffer. VTL operates every valve within the linear range, and the circuit uses zero loop feedback.
What changed in the Series II?
The VTL TP-6.5 Series II takes circuit enhancements from VTL’s TL-7.5 Series III Reference preamplifier, adds a shunt regulator to the power supply, and gives the active moving coil stage a new low-impedance power reserve built with gel capacitors and fed by cascaded regulators and capacitance multipliers. VTL reports a lower background noise, clearer midrange and midbass, and a faster, more dynamic moving coil stage.
Which VTL preamplifiers suit the VTL TP-6.5 Series II?
VTL designed the original TP-6.5 as the companion of VTL’s top preamplifiers, the TL-6.5 and the TL-7.5, equal to both in sonic performance and matching both in controls and appearance. With balanced XLR outputs, the VTL TP-6.5 Series II also suits the TL-5.5 Series II, which accepts XLR on two of the eight inputs, while any of the preamplifiers with a line input can take the RCA pair.
Where can the VTL TP-6.5 Series II be heard and collected?
On Wigmore Street in London, by appointment, which Audio Lounge arranges on enquiry, ideally with a favourite record and the cartridge already in use at home. A reserved unit, in either configuration, is held in the showroom pending collection. The chassis measures 44.5 cm wide and deep and 12.1 cm high, weighs 22.7 kg packed and draws 80 W.






