Sale!

Audio Technica OC9XML

mc cartridge

Original price was: £509.00.Current price is: £425.00.

-17%
Add to Cart
Audio Technica OC9XML
Audio Technica OC9XML
£509.00 Original price was: £509.00.£425.00Current price is: £425.00.

AT OC9XML

The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that increase the magnetic energy, and the nude Microlinear stylus on a boron cantilever that tracks the record groove with incredible accuracy, low distortion and high-transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

    • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
    • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
    • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
    • Nude Microlinear stylus and boron cantilever provide lower distortion and high transient response
    • A neodymium magnet and a premium permendur yoke with high saturation flux density and outstanding magnetic properties further enhance the concentrated magnetic field of the coil gap
    • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
    • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Technical Specifications:

ModelAT-OC9XML
Mounting1/2” centers / Threaded
Frequency Response20 to 47,000 Hz
Body MaterialAluminium
Channel Separation27 dB (1 kHz)
Output Channel Balance1.0 dB (1 kHz)
Output Voltage0.4 mV (at 1 kHz, 5 cm/sec)
Vertical Tracking Angle20 degrees
Vertical Tracking Force Range1.8 to 2.2 g (standard 2.0 g)
Stylus ShapeMicrolinear
Stylus Size2.2 x 0.12 mil
Stylus ConstructionNude square shank
Cantilever0.28 mm Ø nude boron
Coil Impedance12 Ohms (1 kHz)
Coil Inductance25 μH (1 kHz)
DC Resistance12 Ohms
Static Compliance20 x 10 – 6 cm / dyne
Dynamic Compliance16 x 10 – 6 cm / dyne (100 Hz)
Terminal PinsBrass
Wire Used for CoilPCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load ImpedanceMin 100 Ohms
Cartridge Weight7.6 g
Dimensions17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector