VTL ST-85

Compact Valve Stereo Amplifier
  • Built by hand in California
  • Four classic EL34 output valves
  • 60 watts per channel in tetrode
  • Triode mode for delicate detail
  • Room-filling sound from compact speakers
  • Smoked glass window onto the valves
  • Black or silver aluminium front

£5,650.00

Add to Cart
The VTL ST-85 stereo valve amplifier in silver, seen from the front
VTL ST-85
£5,650.00

Collection only, from our showroom at 138-140 Wigmore Street, London W1U 3SG.

A Compact Stereo Valve Amplifier

The VTL ST-85 is a compact stereo valve amplifier, hand-built at VTL’s factory in Chino, California, and the model VTL designed for systems taking a first step into VTL amplification. Four EL34 valves deliver a solid 60 watts per channel, and VTL set out to give the ST-85 a full measure of the VTL sound, the family character VTL describes as clear and vivid, full in body, with substantial bass under a deep stage.

VTL describes the EL34 models as studies in compact chassis with short signal paths. The ST-85 shows the idea at work, a two-channel amplifier of modest size that VTL built to sound anything but small.

Tetrode Power, Triode Delicacy

Two characters share one chassis. In tetrode mode the VTL ST-85 gives the full rated power, with the detail, the soundstage width and depth and the weight that carry a symphony orchestra or a big band into the room with visceral force. Switched to triode, the output halves to 30 watts per channel and the sound turns towards delicacy, liquidity and sweetness, the mode VTL suggests for vocals, chamber music, jazz quartets and solo instruments at lower volume with efficient loudspeakers.

The changeover switches sit on the back panel, one for each channel. With the amplifier powered down, the switches are set to the chosen mode, and the ST-85 returns with a different voice for a different evening of music, a flexibility shared by VTL’s stereo and monoblock models.

The EL34 at Work

The output stage of the VTL ST-85 rests on four EL34 valves. VTL calls the EL34 a classic workhorse, the valve on which the VTL sound was founded, and values the musical character the EL34 brings to a rugged, compact design.

Around the valves, the ST-85 follows the beliefs behind every VTL design: a pure valve signal path, short and simple, a big, well-regulated power supply, and an output transformer matched with care to the circuit. VTL sums up the approach as keeping designs simple and compact, with fewer parts and less complex circuits, for clean, pure sound and an amplifier that is easy to live with.

A Generous Sound from Compact Loudspeakers

VTL built the ST-85 to create an exceptionally large, sweet space of sound from satellite loudspeakers, mini-monitors and smaller floor-standing designs. A pair of bookshelf speakers on stands makes a natural partner, and the VTL ST-85 lets the music bloom well beyond the cabinets themselves.

Efficient loudspeakers reward the triode mode with three-dimensional imaging through the midrange, while tetrode, with twice the power, gives larger-scale recordings full weight. Partners can be heard side by side in London by appointment.

Partnering a VTL Line Stage

A dedicated amplifier, the VTL ST-85 offers one input for each channel and leaves the choice of source and the setting of volume to a line stage. VTL’s own point of reference is the TL2.5 line stage: VTL likens the sound of the one-chassis IT-85 to the ST-85 driven by a TL2.5, fast, musical and three-dimensional, with solid bass support. Further partners wait in Audio Lounge’s preamplifiers collection.

The ST-85 also completes a VTL upgrade path. The IT-85’s pre out is gain-matched by VTL to the ST-85, so an IT-85 system can grow into horizontal bi-amping, with the two amplifiers dividing the work of a pair of bi-wirable loudspeakers.

Black or Silver, with a Window onto the Valves

The front panel is extruded aluminium with a luxurious, modern look, finished in black or silver, and a window of thick smoked glass lets the warm glow of the valves show through. Seen from across the room, that glow is part of the pleasure of valve amplification.

Every ST-85 is hand-built in California by experienced craftspeople and passes through VTL’s quality routine: a long burn-in and testing period, a final listening test and an engineer’s sign-off before packing, with the Audio Precision test results for the unit included. User-replaceable mains and high-tension fuses protect the amplifier against component failure and keep servicing simple.

Hearing the VTL ST-85 at Audio Lounge

Tetrode and triode are best compared on familiar recordings, with the loudspeakers and preamplifier that will share the system. A demonstration of the VTL ST-85 can be arranged on Wigmore Street by enquiry, with partners set out in advance for the session. The ST-85 is part of Audio Lounge’s power amplifiers collection, and when the finish has been picked on this page, the amplifier is kept at the London showroom for collection.

About VTL

VTL, short for Vacuum Tube Logic, grew from studio playback amplifiers that David Manley, an engineer from recording and film, first designed in South Africa in 1980, prototypes proven over long, arduous sessions. Home audio production began in Britain in 1983, and after a well-received showing in Chicago in 1986, David and his son Luke brought VTL to America, starting in a basement in Providence, Rhode Island, before moving production to Chino, California, in 1987, where every VTL product is still made. Under Luke Manley, at the helm since 1993, VTL launched the Wotan Reference monoblock in 1995, hailed as one of the world’s most powerful valve amplifiers in continuous production. Audio Lounge’s VTL collection spans line stages, phono stages and amplifiers, all made in Chino.

Questions About the VTL ST-85

What is the VTL ST-85 valve stereo amplifier?

The VTL ST-85 is a valve stereo amplifier of compact size, a two-channel valve power amplifier hand-built by VTL in Chino, California. Four EL34 output valves deliver 60 watts per channel in tetrode mode, or half that in triode, selected with switches on the back panel. A line stage feeds the ST-85, and the extruded aluminium front panel is finished in black or silver.

How do the tetrode and triode modes of the VTL ST-85 differ?

Tetrode delivers the full rated power, which VTL credits with detail, a wide and deep soundstage and real weight on orchestral or big band recordings. Triode reduces the output to 30 watts per channel in exchange for delicacy, liquidity and sweetness, suited to quieter evenings and efficient loudspeakers. Changeover switches on the back panel set the mode, with the amplifier powered down first.

Which valves does the VTL ST-85 use?

Eight valves in total, four EL34 in the output stage and four 12AT7. The output valves work in Class AB1, and the VTL ST-85 is an EL34 amplifier built around the valve VTL calls a classic workhorse. VTL tests every unit after a long burn-in period before shipping, and the Audio Lounge team gives advice on replacement valves whenever a change is due.

What power does the VTL ST-85 deliver in each mode?

Sixty watts per channel in tetrode and 30 watts per channel in triode, both into 5 ohms. VTL’s rating holds across 20Hz to 20kHz with total harmonic distortion below 2.5%. Input sensitivity is 0.68V for 60 watts, input impedance 100k ohms, and VTL quotes a signal to noise figure of -95dB at 120Hz, referred to 60 watts.

Which loudspeakers suit the VTL ST-85?

Compact and efficient designs, above all. VTL gives an optimum load range of 2 to 8 ohms and builds the VTL ST-85 to draw a large, sweet sound from satellites, mini-monitors and smaller floor-standing loudspeakers. Efficient models make the most of triode mode. Slimmer partners can be auditioned among Audio Lounge’s floorstanding speakers as well as the standmount designs.

Does the VTL ST-85 need a preamplifier?

Yes. As a valve power amp, the VTL ST-85 has no volume control and no source selector, only one single-ended RCA input for each channel, so a line stage chooses the source and sets the level. VTL’s own reference pairing is the ST-85 with VTL’s TL2.5 line stage, and other partners can be compared in London.

Can the VTL ST-85 bi-amp with the VTL IT-85?

Yes. VTL gain-matches the pre out of the IT-85 precisely to the ST-85, so the two can run a horizontally bi-amplified system: the IT-85’s own amplifier drives one section of each loudspeaker and the ST-85 the other, with bi-wirable loudspeakers. VTL designed the arrangement as an upgrade path for an IT-85 system.

What connections does the VTL ST-85 offer?

One single-ended RCA input and one pair of loudspeaker binding posts for each channel, a tetrode and triode switch for each channel, and an IEC inlet for a detachable mains lead, all on the back panel. The ST-85 offers no balanced XLR input. Fuse holders for the mains fuse and the B+ fuses sit on the back panel too, and suitable speaker cables can be chosen during a demonstration.

How large is the VTL ST-85?

The VTL ST-85 measures 40cm wide, 30cm deep and 18cm high, and weighs 20.5kg, or 25kg packed. The amplifier draws 140 watts at idle and 500 watts at full power. On 220 to 240V supplies the mains fuse is a 3A ceramic slow-blow type, and each B+ fuse is a 0.5A fast-acting ceramic fuse, all user-replaceable.

Where can the VTL ST-85 be heard?

By appointment in London. A message to Audio Lounge arranges a demonstration on Wigmore Street, where tetrode and triode can be compared on favourite recordings and partners discussed. The VTL ST-85 is sold for collection only: reserved in black or silver, the amplifier waits at the showroom until collected.

Specifications

Amplification Design: No selection

Class AB, Valve

Valve complement: No selection

4 x EL34, 4 x 12AT7

Class of operation: No selection

Class AB1

Operating modes: No selection

Tetrode, 60 W per channel, Triode, 30 W per channel, Changeover switch on the rear panel for each channel, set with the amplifier powered down

Power Output: No selection

2 x 30W into 5 ohms (triode), 2 x 60W into 5 ohms

Inputs: No selection

1 x Stereo RCA pair

Outputs: No selection

1 pair of loudspeaker binding posts per channel

Input sensitivity: No selection

0.68 V for 60 W

Input impedance: No selection

100 kΩ

Optimum load range: No selection

2 Ω to 8 Ω

THD: No selection

< 2.5% at rated power (20 Hz to 20 kHz)

Signal to noise ratio: No selection

-95 dB (120 Hz, at 60 W)

Power consumption: No selection

140 W (idle), 500 W (full power)

Fuses: No selection

Mains: 3A ceramic slow-blow (220/240V), B+: 0.5A fast-acting ceramic, one per channel, User-replaceable

Construction: No selection

Compact chassis with short signal paths, Extruded aluminium front panel, Window of thick smoked glass showing the valves, IEC mains inlet for a detachable mains lead

Production: No selection

Hand-built in Chino, California, USA

Condition

New

Colour: No selection

Black, Silver

Dimensions (H x W x D): No selection

180 x 400 x 300 mm

Weight: No selection

20.5 kg