The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.
Maintenance Set included the package
2M Bronze Maintenance Set included the package:
1 x Stylus brush
1 x Screwdriver
2 x Screw M2,5 x 5
2 x Screw M2,5 x 7
1 x Stylus pressure gauge
2M Bronze Verso Maintenance included the package:
1 x Stylus brush
1 x Allen key Torx 6
1 x Allen key Torx 8
2 x Screw M2,0 x 6
1 x Stylus pressure gauge
Stylus lifetime:
With proper care we find that up to 1000 hours is possible without degradation of performance.
2M Series styli interchangeability:
The 2M Series’ engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2m Black LVB 250
- 2M Mono and 2M 78
Output voltage at 1000 Hz, 5cm/sec.: | 5 mV |
Channel balance at 1 kHz: | 1 dB |
Channel separation at 1 kHz: | 26 dB |
Channel separation at 15 kHz: | 15 dB |
Frequency response: | 20-20.000 + 2 / – 0 dB |
Tracking ability at 315Hz at recommended tracking force: | 80 µm |
Compliance, dynamic, lateral: | 22 µm/mN |
Stylus type: | Nude Fine Line |
Stylus tip radius: | r/R 8/40 µm |
Tracking force range: | 1.4-1.7 g (14-17 mN) |
Tracking force, recommended: | 1.5 g (15 mN) |
Tracking angle: | 20° |
Internal impedance, DC resistance: | 1.2 kOhm |
Internal inductance: | 630 mH |
Recommended load resistance: | 47 kOhm |
Recommended load capacitance: | 150-300 pF |
Cartridge colour, body/stylus: | Black/Bronze |
Cartridge weight: | 7.2 g |
Replacement stylus unit: | 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250) |